Full Body Harness – Contractor Series

FallTechs Contractor series Safety Harnesses offer a lot of features to get you safely through your workday. The FallTech Contractor full body safety harness comes with five-point adjustability, lanyard keepers polyester webbing. Superior safety when you need it most, everyday! Model # 7016 Features: Single back D-ring 5-point adjustability 9-position tongue buckle leg straps, two lanyard keepers, and 6,300 pound heavy-duty polyester webbing.
See our other fine harnesses at Fall Tech

REG $75.00

XL $80.00

XXL $83.00

 

 

ClearPack 6-Foot Shock Absorbing Lanyard Z07

Designed to limit arrest forces to 900 pounds. This single-leg lanyard for fall arrest features 1-inch polyester webbing with tensile strength of 9,800 pounds.  This lanyard features double-locking snap hooks at the attachment and anchorage ends. ClearPack Shock Absorbing Lanyards are the bench-mark in lanyard design. This shock absorber utilizes a tear-away webbing which, when deployed in a fall, literally tears itself in half to dissipate the forces. It utilizes a lightweight, high strength polyester webbing as a back-up to ensure that it arrests the fall.  All of our lanyards are designed to meet or exceed applicable OSHA and ANSI standards.  Meets the requirements of ANSI Z359.1-2007, A10.32-2004 and OSHA 1926

$60.00

 

 

Rope Lifeline and rope grab 

Constructed with 5/8-inch, 3-strand polyester rope. The polyester rope has a tensile strength of 8,500 pounds. Features a double-locking snap hook and steel thimble at the anchorage end, and a taped termination at the trailing end.   Rope grab connects to rope and lanyard connects to rope grab which is connected to your harness.

50′ lifeline  $98.00
100′ lifeline  $140.00
Rope Grab 5/8″  – $100

The Hinged Self-Tracking 5/8-Inch Rope Grab is made with rugged alloy-steel construction that features hinged construction for ease of attachment as well as a positive lock and safety cam for superior safety.  The 2-inch eye makes for excellent connector compatibility and easy handling.   All of our Rope Grabs, whether manual or self-tracking, allow the user to move freely up and down the vertical lifeline while providing fall protection.  All FallTech Lifelines, Rope Grabs and Roofer’s Kits meet or exceed all applicable OSHA and ANSI standards.

 

 

Perimeter roof fall protection  $60.00

Use this channelizer for protection of employees and other workers that are near a roofs edge. The channelizer when used with our flagging will mark off an area to let workers know when they are near an unsafe distance from the edge. The 42″ tall channelizer w/30 lb base is perfect when attempting to meet the OSHA codes for perimeter protection. This item comes with one channelizer and one 30 lb base. Purchase additional as needed as well as the flagging. Unit does not come with reflective collars as shown.

 

 

Confined Space Tripod Kit  $5,500

The confined space equipment is used in lowering employees down into a confined space. Not all items are pictured. The confined space equipment includes:

One 7′ tripod w/brkt (7274), one 60′ 3 way retractable/SRL Galv cable (7283), one 7284 bracket for 7283 SRL, one 60′ winch w/galv cable (7290), and equipment storage bags.  See other confined space kits

 

 

 

Rope Anchor Point for Lifeline  $35.00

Re-usable anchor point. Tie off your lifeline to this anchor point. Sturdy anchor is easily installed and removed from trusses or sheathing, allowing repeated uses from job to job. Fits any roof peak up to 12/12 and can also be mounted perfectly flat. U.S.A. Osha Approved: Yes/1926,Rated Load (lbs.): 5,000+,ANSI Approved: Yes/Z359,Material Type: Alloy steel,Mount Type: Flat, peak. Heavy-duty hinged roof anchor rated at 5,000 lbs.

 

Rope single use anchor point

Single use anchor point for connection of your lifeline. Uses 14 common 16d nails, Conforms to any roof pitch, When finished roofing, simply hammer the captive eye over and cover anchor with ridge caps. Rated at over 5,000 pounds, Meets the Requirements of OSHA 1926 and ANSI Z359.  All FallTech anchors and connectors meet or exceed OSHA and ANSI standards.

$12.00

 

 

Self Retracting Lifeline  $550.00

20’ DuraTech SRL is a fully-featured block with galvanized steel cable and CNC machined aluminum housing and drum. The internal brake is constructed with a hard-wearing bronze ratchet center and pawls with an alloy steel pressure plate. Also features the DuoTech load-indicating snap hook for attachment to the back D-ring of your full body harness.

3/16” Galvanized steel cable has a tensile strength of 4,000 lbs. Aluminum housing and drum are durable, lightweight and resistant to corrosion. Housing features built-in carry handle. High-strength aluminum-alloy main shaft for lighter weight. Spring and ball buffer assembly prevents lock-up from free-wheeling. Includes free tag line to prevent free-wheeling. Fully serviceable, re-certification required every two years. Reduces arrest forces to less than 900 lbs. Weighs only 16 lbs. Meets the requirements of OSHA 1926 and ANSI Z359. Related Styles

7227S – 20’ DuraTech SRL, stainless steel line. Weights 16 lbs. 7226S – 15’ DuraTech SRL, stainless steel line. Weighs 15 lbs. 7226 – 15’DuraTech SRL, galvanized steel line. Weighs 15 lbs.

See other styles and lengths available, contact our sales department to discuss your specific need and the correct device to meet you application.

 

Pricing subject to change without notice. Please call for and accurate quote on your purchase!